SPS Solution Preparation System

Sku#

9724-Z61

SPS Solution Preparation System

In stock

The semi-automated CANNON SPS Solution Preparation System uses gravimetric (weight-to-weight) rather than volumetric methodology to prepare
highly accurate (± 0.02% of target) polymer solutions for relative viscosity measurement on CANNON automated polymer viscometers.

Gravimetric preparation eliminates errors associated with variation in solvent density as well as manual weight/volume measurements.

COMMON APPLICATIONS

  • Dilute solution viscosity of ethylene polymers
  • Intrinsic visosity of cellulose
  • Inherent viscosity of PET
  • Solution viscosities of polyamide
  • All-in-one, automated Solution Preparation System, when coupled with an automated viscometer (such as miniPV®-HX, miniPV-X, or PolyVISC®), provides a complete polymer analysis system. SPS Solution Preparation System includes:
    • titrator for dispensing solvent
    • balance
    • proprietary software for facilitating and managing solution preparation
  • Reduced variability with accurate results independent of temperature fluctuations 
  • Concentration accuracy ± 0.02% for most samples over 100 mL
  • Gravimetric or weight-based sample preparation eliminates errors associated with volumetric methods resulting from:
    • changes in solvent density due to temperature fluctuation
    • laborious manual weight and volume measurements
  • Convenient user configuration and storage of multiple sample/solvent recipes
  • Software directs user to add solute, calculates volume, and automatically adds solvent to the sample container
  • Concentration is automatically calculated and stored along with other sample information for future reference
  • Prepares solutions according to weight-to-weight and weight-to-volume methodology
  • Solution prep time is approximately 2 minutes for most samples
  • Eliminates need for expensive and delicate glassware
Specifications
Unit Weight

Titrator: 2 kg (4.4 lb)
Balance: 9.1 kg (20.1 lb)

Method ASTM D789, ASTM D1243, ASTM D1601, ASTM D1795, ASTM D2857, ASTM D3591, ASTM D4020, ASTM D4243, ASTM D4603, ASTM D5226, ASTM D5336, ISO 307, ISO 1628-1, ISO 1628-3, ISO 1628-5, ISO 5351
Dimensions (W x D x H)

Titrator: 13.5 cm × 20.5 cm × 31.0 cm (5.3 in × 8.1 in × 12.2 in)
Balance: 26.3 cm × 45.3 cm × 32.2 cm (10.4 in × 17.8 in × 12.7 in)

Shipping Dimensions (W x D x H)

Titrator: 30.5 cm × 30.5 cm × 40.6 cm (12 in × 12 in × 16 in)
Balance: 53.3 cm × 38.1 cm × 43.2 cm (21 in × 15 in × 17 in)

Shipping Weight (With All Items) 17.2 kg (38 lb)
Maximum Throughput As low as 2 minutes (per 50 mL solvent)
Operating Conditions 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II, Pollution Degree 2
Electrical Specifications

Titrator: 100 Vac to 240 Vac, 50/60 Hz, 70 watts power consumption
Balance: 90 Vac to 240 Vac, 50/60 Hz, 80 watts power consumption

Compliance CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC)
Flow Rate 0 mL/min to 400 mL/min