Downloads

CANNON suggests using Windows® 10 operating system. Any computers running Windows® XP must download the appropriate XP software in the notes section of the instrument or program. Please address all questions to customer service at 814-353-8000 or 800-676-6232. Refer to the Computer Specifications information that is included in the instrument documentation.

Software Files
ZIP Files	Version	Released	Notes
BBRw	1.35.1	10/07/2021	Software required for running ASTM D6648 and AASHTO T313 tests using the BBR. For Windows® XP software, click BBRw XP (version 1.27).
BBRw Long Test Version	3.24		NOT INTENDED FOR PRODUCTION USE. Software for special extended loading time and recovery time. Intended for research.
FlowHub™	2310.1.0	10/16/2023
HTHS	2.02
SPS	1.33	05/02/22
TESC D2983 Testing
TESC D5133 Testing	2404.1.0	coming soon
TESC D8210 Testing
VISCPRO I	1.32.3	1/24/2023	For Windows® XP software, click VISCPRO I XP (version 1.31.8).
VISCPRO II	2.73.1	09/12/2024	VISCPRO must always be as up-to-date as the CAV 4.2 software. VISCPRO can be newer than the CAV 4.2 software, but if the software on the CAV 4.2 is newer, there could be some compatibility issues. Update VISCPRO to avoid issues. For Windows® XP software, click VISCPRO II XP (version 2.56.4).
Network Setup Script for using VISCPRO II with CAV 4.2		4/29/2016	This script can be used to automatically perform the Set up network adapter and Configure firewall rules procedures on pages 28-31 or the CAV 4.2 Operator's Manual.

VISCPRO II	CAV 4.2/4.1 Package
2.73.1	1.39.1	E_CAV4200UI.EXE/ E_CAV4100UI.EXE	Firmware Package
		1.39	2.0.28	Bath Controller	Sample Handler	Valve Controller
				2.0.8	0.55	0.11

Firmware
ZIP Files	Version	Released	Notes
Firmload for Windows
BBR			Firmware for the TE-BBR
BBR-SD	2.10	6/29/2021	Firmware for the BBR-SD
AV2100	1.05		Latest version of the AV2100 Contains SlavTalk and AV Sensor
AV2200	2.09		Latest version of the AV2200
miniAV	2.35		Latest version of the miniAV Must be used with VISCPRO II version 2.56.3 and newer. Now uses % Overdraw Fast run: Bulb 1 = 100%, Bulb 2 = 40% Standard Run: Bulb 1 = 50%, Bulb 2 = 10%
CAV 4.2 UI/Firmware CAV 4.1 UI/Firmware	1.39.1	09/12/2024	Must update to latest version of Viscpro II when updating instrument firmware. When the sample handler is updated to firmware .21: DO NOT HOME until adjusting the elevation offset. Doing so can damage the sample handler Use Teraterm to set both the elevation offfset and heater arm offset to zero With a vial in place, raise the lift bucket Adjust the elevation offset to allow some spring movement in the lift bucket in the raised position Verify that the rotational offset is still ideal. Adjust if necessary Do not adjust the heater arm offset
USB 2.0 to Ethernet Driver			Drivers to manually install the USB to Ethernet adapter
UltraVIS	2405.1.0	06/04/2024	Updating from pre-version 2302.1.0 will require resetting C/E constants and temperature offset.
CCS	2.17		Latest version of CCS. Contains firmware for CCS legacy encoder (version 2.01)
MRV	2.06		Latest version of the MRV
CT2K0105	1.05	05/09/2022
MFV101
DPV	2.12	2/23/2021	Contains DPV firmware version 2.12 for chilled applications. Contains DPV firmware version 2.11 for unchilled applications.
PolyVISC	2.16		Latest version of the PolyVISC
TE3K0103
LubeVIS	0112
PulpVIS	0112
SimpleVIS	0112
SimpleVIS II	0112

Quote request for

My information

*required fields

Orderer's Name:

Company:

Address1:

Address2:

City:

Postal Code:

State:

Country:

Customer Email

Orderer's Phone Number:

Additional information needed

*required fields

Quote request for:

Product quantity to quote:

Material to be tested:

Technical requirements: (e.g. voltage, temp, etc)

Other comments

*Include leasing information with quote:

Yes

Quote will be sent to email on left.

Check here if additional copies are required and provide contact details below.

Downloads

Software Files

TESC D5133 Testing

Firmware