ULTRAVIS 192
Sku#
9729-A05
ULTRAVIS® 192 High Speed, Solvent-Free Kinematic Viscometer
In stock
UltraVIS 192 is a fully automated, high speed, solvent-free viscometer for rapid kinematic viscosity measurement of transparent and opaque liquids. A 192-position sample handler (two 96-position trays) allows unattended processing of up to 24 samples per hour. The fast-run tubes cover a viscosity range of 5 to 50 mm2/s (cSt) at 100 °C and 30 to 680 mm2/s (cSt) at 40 °C (40 °C viscometer tube range is 30 to 300 mm2/s but viscosity may be measured up to 680 cSt).
The UltraVIS 192 is optimized for condition monitoring of in-service oils.
Protect your investment and ensure your instrument continues to provide quality and reliable results for years to come with a CANNON Service Plan.
Factory installation of this unit is required. If factory installation is waived, only parts are covered during the warranty period. Damage occurring from incorrect installation is not covered by warranty.
Precise, Robust Design
- Viscosity range:
- 5 to 50 mm²/s (cSt) at 100 °C (±0.02 °C)
- 30 to 680 mm²/s (cSt) at 40 °C (±0.02 °C)*
- Runs highly sooted samples, 200+ UFM
- A well tested CANNON viscometer platform offers reliability and dependable support
High Speed Analysis & Rapid Output
- Fast analysis time: typically 2.5 minutes per test, for 24 samples per hour
- Two 96-position removable sample trays allows for high output (192 samples) and unattended operation
- Follows most ASTM D445 principles but with shorter flow times to accommodate rapid analysis
Fully Automated Benchtop Testing
- Eliminates labor intensive tasks of sample measurement and viscometer tube washing
- Stand-alone operation with USB port and onboard software which allows you to view and configure your data
- Included FlowHub™ PC software allows connection for customizable transfer of data to your LIMs software and easy import of sample trays to your instrument
Reduced Consumable Costs
- Save time and money—no need for solvent
- Uses disposable, low-cost HDPE sample vials
- Solid bath design requires no bath fluid
Effortless Operation
- Large, intuitive, color touchscreen
- Uses industry standard 96-position trays; no need to transfer vials
- Multi-colored Beacon Light easily distinguishes sample phases
*40 °C viscometer tube range is 30 to 300 mm²/s (cSt) but viscosity may be meaured up to 680 mm²/s (cSt).
| Unit Weight | Unit: 47.2 kg (104 lb) Vacuum Pump: 7.25 kg (16 lb) |
|---|---|
| Dimensions (W x D x H) | Unit: 60.9cm x 60.9 cm x 77.5 cm (24 in x 24 in x 30.5 in) Vacuum Pump: 23 cm x 32.4 cm x 20 cm (9.1 in x 12.75 in x 8 in) |
| Maximum Throughput | up to 24 tests per hour |
| Sample Capacity | 192 |
| Viscosity Range | 5 to 50 mm²/s (cSt) at 100 °C 30 to 680 mm²/s (cSt) at 40°C* *40°C viscometer tube range is 30 to 300 mm²/s (cSt) but viscosity may be measured up to 680 mm²/s (cSt) |
| Timing Resolution | 0.001 s |
| Temperature Range and Accuracy | 100 °C ±0.02 °C 40 °C ±0.02 °C |
| Minimum Sample/Solvent Volume | 10 mL recommended |
| Operating Conditions | 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2 |
| Electrical Specifications | 100 Vac, 50/60 Hz; 115 Vac, 60 Hz; 230 Vac, 50/60 Hz; 250 watts power consumption |
| Compliance | CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS |
| Data Output | USB, FlowHub™ |
Related Products
