HTHS SERIES II
Sku#
9728-C35
HTHS Series II High-Temperature, High-Shear Viscometer
In stock
The CANNON HTHS Series II is a multicell capillary viscometer for simple viscosity testing of engine oils at high temperature and high shear. It meets all requirements and precision specifications of ASTM D5481 and SAE J300.
Factory installation of this unit is required. If factory installation is waived, only parts are covered during the warranty period. Damage occurring from incorrect installation is not covered by warranty.
Meets all ASTM D5481 and SAE J300 requirements and precision specifications
- Temperature range: 30 °C to 150 °C (± 0.1 °C)
- Viscosity range: 2 mPa·s (cP) to 7 mPa·s (cP)*
- Test pressure: variable from 50 psi to 500 psi
- Variable test temperature and shear rate supports research applications
User-friendly, high-speed testing
- Simple, one-button operation
- Multi-cell design permits sequential testing of up to 5 different samples
- Tests up to 20 samples per hour at 1.4 × 106s-1 at 150 °C
- Instrument digitally displays flow time, temperature, and pressure
- Stand-alone viscosity calculation software analyzes data and displays results
- Sample flush cycle eliminates need for hazardous cleaning solvents
Robust, reliable performance
- Proven CANNON® reliability and outstanding support
- Reduced operator role enhances repeatability and reproducibility
*Viscosity range is extendable to 20 mPa·s (cP) with custom configuration
| Unit Weight | 40.5 kg (89 lb) |
|---|---|
| Method | ASTM D5481, SAE J300 |
| Dimensions (W x D x H) | 52.1 cm × 38.7 cm.0 × 68.6 cm (20.5 in × 15.25 in × 27 in) |
| Shipping Dimensions (W x D x H) | 81.3 cm × 71.1 cm × 106.7 cm (32.0 in × 28.0 in × 42.0 in) |
| Shipping Weight (With All Items) | 77.1 kg (170 lb) |
| Maximum Throughput | Up to 20 samples per hour |
| Sample Capacity | 5 |
| Viscosity Range | 2 mPa·s (cP) to 7 mPa·s (cP) extendable to 20 mPa·s (cP) with custom configuration |
| Timing Resolution | 0.01 s |
| Temperature Range and Accuracy | 30 °C to 150 °C, ±0.1 °C |
| Minimum Sample/Solvent Volume | 10 mL sample |
| Operating Conditions | 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2 |
| Electrical Specifications | 100 Vac, 50/60 Hz; 115 Vac, 50/60 Hz; 230 Vac, 50/60 Hz; 500 watts power consumption |
| Compliance | CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc,60 sec.); ROHS |
